General concrete bearing building blocks
The series products of general bearing building blocks are one of the leading products of company. Basing on lower price and higher-performance, the products has been used widely in inner - outside wall of the economic construction and high-rank construction, even the common wall.
Superior Bearing Building Blocks have features as following:
- High-Performance of Building Block
The building blocks are made from sand, stone and concrete these main materials, which with high strength and lasting quality. It has MU10, MU15, MU20 three strength grade and imperious and not imperious guideline for picking up, satisfying monolayer, multilayer, and the demand for strength and impervious guideline of inside-outside wall in high-rise building.
- Excellent Structure Performance
The building blocks are not only could be used for self-weight bearing wall, but also the decorative enclosure wall of frame construction. The building blocks have big hollow volume, which is suitable for the project with the construction weak carrying capacity foundation. Comparing with the weight of solid bricks, the self-weight of wall could be reduced to 1/3. Due to the hollow inside the building blocks, it could be build the perpendicular and horizontal interpenetrate reinforced concrete stem and girder replacing of the constructional column and ring beam of the structure mixing with brick and concrete. This reinforcing masonry building block could make the building perfect integrity, load-bearing capacity, anti cushioning, and reducing and eliminating the appearing of concrete. Building blocks construction possesses good integrity. The house built by the building blocks compound with appropriate heat-reservation materials could reach the construction energy-saving standard.
- Various Kind of Products Mould
There are hundreds of the building blocks products brought in or developed by company itself.
The standard dimension is listed as following. The length is separately 90, 190, 290 and 390mm. The width is separately 90, 140, 190, 240, 280mm. The height is 90 and 190mm, and so on. These could satisfy the single mode and double mode construction module. Various kind of mould could provide the convenience for design, even decrease the working load of saw masonry at the job site.
- High Efficiency of Construction
Because of its comparative large volume of concrete building blocks, the stem and part of ring girder without the formwork, the speed of building is very fast, little using mortar, the low cost of moulding board and large-sized machine. Standard building block dimension makes the flatness of wall surface, and decreases the plastering of inner wall. Therefore, the house built by JinYang building blocks could increase the efficiency and cut down the construction cost and shorten the project period.
- Low Total Cost
Comparing the general concrete building blocks construction and mix bricks construction, the construction cost is similar the same. Municipal construction committee has ever taken the compared test on the exact cost of mix bricks and building blocks construction. The result is that the construction cost of building blocks is similar with the construction of mix-bricks. The self-weight of building blocks construction is a little lighter. So it could save the construction basic cost. The construction wall of single wall is comparatively thin without the plastering of inner wall. It will have more 3%-5% using square, comparing with the solid bricks building. Accounting by the price 2600 per square meter and 5% increasing rate utilization area of economic room , it is equal to say that more 130yuan profit been earned.
  |
